Open tube furnace

Open tube furnace The inner liner of the tubular electric furnace is made of the lightest high-temperature resistant fiber material in the world. It is composed of two semi-circular furnace bodies. It is easy to open and can be used as a vertical or horizontal type. Or the furnace body can be installed on other work surfaces as required, or it can be integrated with the controller system GWL, and the control system adopts LTDE technology programmable intelligent instrument. Surface Gas Nitriding Treatment of 2Cr13 Steel It has up to 30 sections of heating program function, and can correct the slope and PID function. Just open the power setting program, the machine will work automatically, and it will automatically shut down after work. The instrument is easy to operate, has fast heating speed, adjustable heating speed, light appearance, and its weight is one-fifth of that of ordinary high temperature furnaces.What are the characteristics and advantages of the MIM process? Normal operation: Turn on the power and press the ↑ key for two seconds to make STOP appear in the SV window. Setting steps: Press the ← key PV to display C01. Press ←↑↓ to set the desired temperature. Press SET key, PV displays t01. Press ←↑↓ to set -1. Wait until you return to the menu (SV shows STOP). Press the ↓ key again for two seconds, the SV will display RUN. At this point, the PV shows a rise in temperature. The SV window HOLD and the set temperature are displayed alternately.Vacuum Brazing of EGR Stainless Steel Cooler